Gw-instek GDB-03 Bedienungsanleitung

GDB-03 Demo Module USER MANUAL GW INSTEK PART NO. 82DB-03000EA1 ISO-9001 CERTIFIED MANUFACTURER

GDB-03 Demo Module User Manual 8 Specifications Signal output • 5 types for digital analyzer, 9 types for analog analyzer(For GDS-3000) • 7 types

GDS-3000 9 GDS-3000 Demonstration setup Step 1. Turn on the GDS-3000. 2. Install the Demo module software. Please refer to the chapter “SOFTWAR

GDB-03 Demo Module User Manual 10 Note Make sure the power LED on the demo board turns on. 4. Select x10 as the attenuation on the probe to limi

GDS-3000 11 For displaying analog waveform For displaying digital waveform

GDB-03 Demo Module User Manual 12 For displaying FM waveform For displaying video waveform 6. Connect the other end of the probe(s) to the cor

GDS-3000 13 7. Adjust the Variable knob on the demo board to select which oscilloscope to demonstrate when the USB cable is connected to the demo b

GDB-03 Demo Module User Manual 14 Software installation Step 1. Insert the USB memory stick with GDB03DemoMode.gz into the USB port on the front p

GDS-3000 15 5. Use the Variable knob to select GDB03DemoMode.gz file and then press the Select button to select it. Up Down 6. Press the Select

GDB-03 Demo Module User Manual 16 Display demo board signal The demo board can be used to display 9 types of analog signals, 5 types of digital sig

GDS-3000 17 Note If the Analog Mode is not selected, press the F1 button on the side menu. Use the Variable knob to select Analog Mode. Press the Sel

This manual contains proprietary information, which is protected by copyright. All rights are reserved. No part of this manual m

GDB-03 Demo Module User Manual 18 Display Split windows 1 (Analog Mode 2) Background Display 4 unsynchronized waveforms at different freq

GDS-3000 19 Display Split windows 2 (Analog Mode 3) Background Display a signal (a more complex signal) that can have different settings and be di

GDB-03 Demo Module User Manual 20 4. Press the Run button to display a waveform in split window as shown below.

GDB-03 Demo Module User Manual 21 Display Auto-Range Function (Analog Mode 4) Background Demonstrate that the oscilloscope can automatically be adj

GDB-03 Demo Module User Manual 22 Display Autoset mode (Analog Mode 5) Step 1. Press the Test key on the front panel of the GDS-3000. 2. Pres

GDS-3000 23 4. Press the Run button. 5. Press the CH1 key to activate CH1. 6. Set the Coupling to AC from the bottom menu.

GDB-03 Demo Module User Manual 24 7. Press the Autoset key on the panel. 8. A waveform as shown below appears.

GDS-3000 25 Display XY mode(Analog Mode 6) Background Display 2 sets of X-Y waveform at the same time. Step 1. Press the Test key on the front pane

GDB-03 Demo Module User Manual 26

GDS-3000 27 Display Gating Measurement (Analog Mode 7) Step 1. Press the Test key on the front panel of the GDS-3000. 2. Press the Demo button.

TABLE OF CONTENTS 1 Table of Contents GETTING STARTED ... 2GDS-3000 Series Overview ...

GDB-03 Demo Module User Manual 28 Note You can set the position of the cursors to set the range of the Gating Measurement. Display Pulse Runt (Ana

GDS-3000 29 4. Press the Run button to display the waveform.

GDB-03 Demo Module User Manual 30 Display Rise Fall (Analog Mode 9) Step 1. Press the Test key on the front panel of the GDS-3000. 2. Press the

GDS-3000 31 Display Pulse Width (Digital Mode 1) Step 1. Connect the probes to the terminals marked Digital CH1~ CH4, and grounding clips to grou

GDB-03 Demo Module User Manual 32 5. Press the Analog Mode button (F1 button). Use the Variable knob to select Digital mode. Press the Select butt

GDS-3000 33 Display UART (Digital Mode 2) Step 1. Press the Test key on the front panel of the GDS-3000. 2. Press the Demo button. 3. Press

GDB-03 Demo Module User Manual 34 4. Press the Run button to display the waveform.

GDS-3000 35 Display I2C (Digital Mode 3) Step 1. Press the Test key on the front panel of the GDS-3000. 2. Press the Demo button. 3. Press th

GDB-03 Demo Module User Manual 36 Display SPI (Digital Mode 4) Step 1. Press the Test key on the front panel of the GDS-3000. 2. Press the De

GDS-3000 37 4. Press the Run button to display the waveform.

GDB-03 Demo Module User Manual 2 GETTING STARTED Using the demo board specially designed for GDS-2000A and GDS-3000, you can verify and observe vari

GDB-03 Demo Module User Manual 38 Display Delay (Digital Mode 5) Background The Delay trigger works in tandem with the edge trigger, by waiting for

GDS-3000 39 5. Press the Run button to display the waveform.

GDB-03 Demo Module User Manual 40 Display FM (FM mode) Step 1. Connect a probe to the FM terminal on the demo board. Connect the grounding clip to

GDS-3000 41 6. Press the Run button to display the waveform.

GDB-03 Demo Module User Manual 42 Display Video (Video mode) Step 1. Connect a probe to the Video terminal on the demo board. Connect the groundin

GDS-3000 43 6. Press the Run button to display the waveform.

GDB-03 Demo Module User Manual 44 Display Sine, Square and Triangle waveform (Generator mode) 1. Connect the probe to the terminal marked on

GDS-3000 45 6. Press the Run button. 7. Press the AutoSet button to display the Sine waveform. 8. Press the Select button on the demo boa

GDB-03 Demo Module User Manual 46 9. Adjust the Variable knob on the demo board to select the Wave Type. Wave Type is selected when it is highligh

GDS-3000 47 Generator Wave Type Triangle 13. Adjust the Variable knob on the demo board to select Triangle. Triangle is selected when it i

GETTING STARTED 3 The 2 channel and 4 channel models differ in the position of the horizontal controls, the math, reference and bus keys as well as t

GDB-03 Demo Module User Manual 48 GDS-2000A Demonstration setup Step 8. Turn on the GDS-2000A. 9. Install the Demo module software. Please r

GDS-2000A 49 Note Make sure the power LED on the demo board turns on. 11. Select x10 as the attenuation on the probe to limit the input signal amp

GDB-03 Demo Module User Manual 50 For displaying analog waveform For displaying digital waveform

GDS-2000A 51 For displaying FM waveform For displaying video waveform 13. Connect the other end of the probe(s) to the corresponding CH1 to CH4

GDB-03 Demo Module User Manual 52 15. Adjust the Variable knob on the demo board to select which oscilloscope to demonstrate when the USB cable i

GDS-2000A 53 Software installation Step 1. Insert the USB memory stick with GDB03DemoMode.gz into the USB port on the front panel of the GDS-2000A.

GDB-03 Demo Module User Manual 54 5. Use the Variable knob to select GDB03DemoMode.gz file and then press the Select button to select it. 6. P

GDS-2000A 55 Display demo board signal The demo board can be used to display 8 types of analog signals, 7 types of digital signals, FM and video sig

GDB-03 Demo Module User Manual 56 5. Press the CH1 key to activate CH1. 6. Set the Coupling to AC from the bottom menu. 7. Press the Auto

GDS-2000A 57 8. A waveform as follow shown appears. Display XY mode(Analog Mode 2) Background Display 2 sets of X-Y waveform at the same time.

GDB-03 Demo Module User Manual 4 GDS-2000A Series Overview Series lineup The GDS-2000A series consists of 8 models, divided into 2-channel and 4-

GDB-03 Demo Module User Manual 58 4. Press the Run button to display the waveform.

GDS-2000A 59 Display Gating Measurement (Analog Mode 3) Step 1. Press the Test key on the front panel of the GDS-2000A. 2. Press the Demo button

GDB-03 Demo Module User Manual 60 Note You can set the position of the cursors to set the range of the Gating Measurement. Display Pulse Runt (Ana

GDS-2000A 61 4. Press the Run button to display the waveform.

GDB-03 Demo Module User Manual 62 Display Rise Fall (Analog Mode 5) Step 1. Press the Test key on the front panel of the GDS-2000A. 2. Press th

GDS-2000A 63 Display Search (Analog Mode 6) Step 1. Press the Test key on the front panel of the GDS-2000A. 2. Press the Demo button. 3. Pr

GDB-03 Demo Module User Manual 64 4. Press the Run button to display the waveform.

GDS-2000A 65 Display Segments (Analog Mode 7) Step 1. Press the Test key on the front panel of the GDS-2000A. 2. Press the Demo button. 3. Pr

GDB-03 Demo Module User Manual 66 Display Parallel (Analog Mode 8) Step 1. Press the Test key on the front panel of the GDS-2000A. 2. Press t

GDS-2000A 67 4. Press the Run button to display the waveform.

GETTING STARTED 5 Required tools • GDS-3000 x 1 or GDS-2000A x 1 • Demo board x 1 • USB type A- type B cable x 1. Used for demo board’s power • D

GDB-03 Demo Module User Manual 68 Display Pulse Width (Digital Mode 1) Step 1. Connect the probes to the terminals marked Digital CH1~ CH4, and gr

GDS-2000A 69 6. Press the Run button to display the waveform.

GDB-03 Demo Module User Manual 70 Display Delay (Digital Mode 2) Background The Delay trigger works in tandem with the edge trigger, by waiting for

GDS-2000A 71 5. Press the Run button to display the waveform.

GDB-03 Demo Module User Manual 72 Display LM(Logic Memory)(Digital Mode 3) Step 1. Press the Test key on the front panel of the GDS-2000A. 2. P

GDS-2000A 73 Note If we compare the waveforms shown above, we can see that we can observe more of the waveform under long memory.

GDB-03 Demo Module User Manual 74 Display Logic (Digital Mode 4) Step 1. Press the Test key on the front panel of the GDS-2000A. 2. Press the D

GDS-2000A 75 Display UART (Digital Mode 5) Step 1. Press the Test key on the front panel of the GDS-2000A. 2. Press the Demo button. 3. Pre

GDB-03 Demo Module User Manual 76 4. Press the Run button to display the waveform.

GDS-2000A 77 Display I2C (Digital Mode 6) Step 1. Press the Test key on the front panel of the GDS-2000A. 2. Press the Demo button. 3. Press

GDB-03 Demo Module User Manual 6 • Generator (page 44) • LIN(page 81) • FM (page 82) • Video (page 85) • Generator (page 87)

GDB-03 Demo Module User Manual 78 Display SPI (Digital Mode 7) Step 1. Press the Test key on the front panel of the GDS-2000A. 2. Press the D

GDS-2000A 79 4. Press the Run button to display the waveform.

GDB-03 Demo Module User Manual 80 Display CAN (Digital Mode 8) Step 1. Press the Test key on the front panel of the GDS-2000A. 2. Press the Dem

GDS-2000A 81 Display LIN (Digital Mode 9) Step 1. Press the Test key on the front panel of the GDS-2000A. 2. Press the Demo button. 3. Pres

GDB-03 Demo Module User Manual 82 4. Press the Run button to display the waveform. Display FM (FM mode) Step 1. Connect a probe to the FM t

GDS-2000A 83 2. Connect the other end of probe to CH1 terminal on the GDS-2000A. 3. Press the Test key on the front panel of the GDS-2000A. 4.

GDB-03 Demo Module User Manual 84

GDB-03 Demo Module User Manual 85 Display Video (Video mode) Step 1. Connect a probe to the Video terminal on the demo board. Connect the groundin

GDB-03 Demo Module User Manual 86 6. Press the Run button to display the waveform.

GDB-03 Demo Module User Manual 87 Display Sine, Square and Triangle waveform (Generator mode) 1. Connect the probe to the terminal marked on th

DEMO BOARD OVERVIEW 7 DEMO BOARD OVERVIEW The demo board is a signal generator board capable of producing waveforms which represent various real lif

GDB-03 Demo Module User Manual 88 6. Press the Run button. 7. Press the AutoSet button to display the Sine waveform. 8. Press the Select b

GDS-2000A 89 9. Adjust the Variable knob on the demo board to select the Wave Type. Wave Type is selected when it is highlighted on the OLED displa

GDB-03 Demo Module User Manual 90 Generator Wave Type Triangle 13. Adjust the Variable knob on the demo board to select Triangle. Triangl

GDB-03 Demo Module User Manual 91 APPENDIX Upgrading the GDS-3000/GDS-2000A Firmware UPGRADE PROCEDURE This firmware upgrade guide describes how t

GDB-03 Demo Module User Manual 92 Upgrade firmware 1. Insert a USB flash disk containing the firmware file, xxx.upg into the front panel USB slot.

APPENDIX 93 5. Rotate the Variable knob to select the xxx.upg file and then press the Select key. Press the Select key again to begin the upgrade p

GDB-03 Demo Module User Manual 94 8. The scope will return to the main screen after the CH1 key has been pressed. (For GDS-3154, GDS-3254, GDS-3

GDB-03 Demo Module User Manual 95 Upgrading the GDB-03 Demo Board Firmware Step 1. Please copy the gdb3h.rom, gdb3m.rom and gdb3s.rom (3 files in

GDB-03 Demo Module User Manual 96 4. Press the Function button key to start the procedure. A message on the OLED screen as shown in the photo belo

APPENDIX 97