Gw-instek PSW-Series Programming & Command manual Bedienungsanleitung PDF herunterladen (Seite 75)

REMOTE CONTROL

Trigger Commands

The trigger commands generate and configure software triggers.

TRIGger:TRANsient[:IMMediate] ...................................... 75

TRIGger:TRANsient:SOURce ............................................ 75

TRIGger:OUTPut[:IMMediate] .......................................... 76

TRIGger:OUTPut:SOURce ................................................. 76

Trigger Command Examples ............................................... 76

TRIGger:TRANsient[:IMMediate]

Set

Query

Description

Generates a software trigger for the transient

trigger system. On a trigger, sets the voltage &

current. Refer to the :CURR:TRIG and VOLT:TRIG

commands on page 69 and 73, respectively.

Syntax

TRIGger:TRANsient[:IMMediate]

Commands

[SOURce:]CURRent[:LEVel]:TRIGgered[:AMPLitude]

[SOURce:]VOLTage[:LEVel]:TRIGgered[:AMPLitude]

TRIGger:TRANsient:SOURce

Set

Query

Description

Sets or queries the trigger source for the transient

system.

Syntax

Query Syntax

TRIGger:TRANsient:SOURce {BUS | IMMediate}

TRIGger:TRANsient:SOURce?

Parameter/Return

BUS

Internal software trigger. Waits for the

*TRG (or IEEE 488.1 “get” group

execute trigger) command to start the

trigger.

IMMediate

Starts the trigger immediately.

(default)

Example

TRIG:TRAN:SOUR BUS

Sets the trigger source as BUS.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 117 118

Kommentare zu diesen Handbüchern

Keine Kommentare

Gw-instek PSW-Series Programming & Command manual Bedienungsanleitung Seite 75

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Gw-instek PSW-Series Programming & Command manual