
PSW Series Programming Manual
80
<NR1> Turns the buzzer on.
Returns the buzzer status.
SYSTem:CONFigure:BLEeder[:STATe]
Sets or queries the status of the bleeder resistor.
SYSTem:CONFigure:BLEeder[:STATe] {OFF|ON|0|1}
SYSTem:CONFigure:BLEeder[:STATe]?
<NR1> Turns the bleeder resistor off.
Turns the bleeder resistor off.
<NR1> Turns the bleeder resistor on.
Turns the bleeder resistor on.
Returns bleeder resistor status.
SYSTem:CONFigure:BTRip[:IMMediate]
Trips the power switch trip (circuit breaker) to
turn the unit off (shut down the power).
SYSTem:CONFigure:BTRip[:IMMediate]
SYSTem:CONFigure:BTRip:PROTection
Enables/Disables the power switch trip (circuit
breaker) when the OVP or OCP protection settings
are tripped. This setting only applies after power
has been reset.
SYSTem:CONFigure:BTRip:PROTection {OFF|ON|0|1}
SYSTem:CONFigure:BTRip:PROTection?
<NR1> Disables the power switch trip for
OVP or OCP.
Disables the power switch trip for OVP or
OCP.
<NR1> Enables the power switch trip for
OVP or OCP.
Kommentare zu diesen Handbüchern