Gw-instek PSU-Series Programming User Manual Bedienungsanleitung PDF herunterladen (Seite 81)

REMOTE CONTROL

[:SOURce]:CURRent:SLEW:FALLing

Set

Query

Description

Sets or queries the falling current slew rate. This is

only applicable for CC slew rate priority mode.

Syntax

[:SOURce]:CURRent:SLEW:FALLing

{<NR2>(A)|MINimum|MAXimum}

Query Syntax

[:SOURce]:CURRent:SLEW:FALLing?

Parameter

<NR2>

Per-Step is Rated Current divided by 100msec

MIN

Minimum falling current slew rate

MAX

Maximum falling current slew rate

Return Parameter

<NR2>

Returns the step current

Example

SOUR:CURR:SLEW:FALL MAX

Sets the falling current slew rate to the maximum.

[:SOURce]:MODE?

Set

Query

Description

Returns the status of the output mode (CC, CV,

Off) of the power supply.

The interface will return “CV’ if the supply is in

Constant Voltage Mode, “CC” if the supply is in

Constant Current Mode or “OFF” if the supply

output is off.

Query Syntax

[:SOURce]:MODE?

Return parameter

Returns the output state as a string, “CC”,

“CV”, “OFF”

Example

:SOUR:MODE?

>CC

The power supply is currently in CC mode.

[:SOURce]:RESistance[:LEVel][:IMMediate]

[:AMPLitude]

Set

Query

Description

Sets or queries the internal resistance in ohms.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 127 128

Kommentare zu diesen Handbüchern

Keine Kommentare

Gw-instek PSU-Series Programming User Manual Bedienungsanleitung Seite 81

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Gw-instek PSU-Series Programming User Manual