Gw-instek PEL-3000 Series Programming Manual Bedienungsanleitung PDF herunterladen (Seite 56)

PEL-3000 Programming Manual

Parallel Commands

[:CONFigure]:PARallel ........................................................ 54

[:CONFigure]:PARallel

Set

Query

Description

Configures the unit for parallel operation, or

queries its state. This command configures the unit

as a Master or Slave, and configures how many

slave units are connected if the unit is configured

as a master.

Note

The booster (PEL-3211) cannot use low current

range.

Syntax

[:CONFigure]:PARallel { OFF | MASTer | SLAVe

|P2|P3|P4|P5|B1|B2|B3|B4 }

Query Syntax

[:CONFigure]:PARallel?

Parameter

P2,P3,P4 or P5

B1,B2,B3 or B4

Number of connected

slaves

Number of connected

booster

OFF

Turn parallel mode off

MASTER or MAST

Sets the unit to Master

SLAVE or SLAV

Sets the unit to Slave

Return parameter

Returns an ASCII string

with the mode of the unit

(Master/Slave) and the

number of connected

devices.

Example

:PARallel MAST

Sets the unit to Master.

:PARallel B2

Configures the unit for use with 2 booster units.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 173 174

Kommentare zu diesen Handbüchern

Keine Kommentare

Gw-instek PEL-3000 Series Programming Manual Bedienungsanleitung Seite 56

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Gw-instek PEL-3000 Series Programming Manual